Vihdoin opin värittämään Photoshopilla valmiita piirroksia edes jotenkin! Olen ylpeä itsestäni! :D
I finally learned how to color sketches with Photoshop! I'm so proud of myself! :D
-89 syntynyt naisimmeinen, joka valmistui Tyrvään käsi- ja taideteollisuusoppilaitoksesta lavasterakentaja-artesaaniksi keväällä 2014.
lauantai 19. tammikuuta 2013
perjantai 19. lokakuuta 2012
Amenhotep III
Olen viimein saanut kopioni Amenhotep III:n graniittipatsaasta valmiiksi! :)
I have finally finished my copy of the statue of the Amenhotep III!
Alkuperäinen veistos:
The original statue:
Ja oma versioni:
And my own version:
Kun olin veistänyt patsaan styroksista, peitin sen voimapaperilla. Patsas sai aluksi 2 kerrosta, ja lopuksi lisäsin vielä 2 kerrosta lisää valtaistuimeen, joka ottanee eniten iskuja vastaan.
When I had sculptured the statue out of styrofoam, I covered it with craft paper. At first I covered the statue with 2 layers, but then I added 2 more layers to the throne as it is most likely to take some hits.
Tummemman pohjavärin päälle (1-pohjaa ja pastaa) töpöttelin erilaisia harmaita saadakseni aikaan kivimäisen pintakuvion, jossa mielestäni onnistuin ihan hyvin. Lopuksi viimeistelin pinnaan maalaamalla valtaistuimeen hieroglyfejä, ja varjostamalla joitakin kohtia patsaasta lisää.
On a darker base colour I painted some different shades of gray (not 50, though) to create a stone-like pattern. I think I succeeded quite well.
Omasta mielestäni patsas on ihan OK. Olen saanut siitä paljon kehuja, mutta tietty näen itse kaikki omat virheeni selkeästi. Loppujen lopuksi patsaani on aika kaukana alkuperäismallistaan, mutta en olekaan ikinä ollut kovinkaan hyvä muotoilemaan jotain konkreettista. Erinomaista harjoitusta tämä on kyllä ollut, ja nautin tämän tekemistä, niin kauan kuin se kestikin. Ehkä joskus, jos taas pääsen vastaavia tekemään, onnistuu jo paremmin.
In my opinion, the statue is quite OK. I've got some praise, but naturally I see all the mistakes I've done. In the end the statue is fairly far from the original, but I have never been too good at sculpturing anything. This has been an excellent way of practising it, though, and I've enjoyded every moment. Even if it lasted so long. Perhaps, if I ever have a change again, I'll do better.
- Mea
I have finally finished my copy of the statue of the Amenhotep III!
Alkuperäinen veistos:
The original statue:
Ja oma versioni:
And my own version:
Kun olin veistänyt patsaan styroksista, peitin sen voimapaperilla. Patsas sai aluksi 2 kerrosta, ja lopuksi lisäsin vielä 2 kerrosta lisää valtaistuimeen, joka ottanee eniten iskuja vastaan.
When I had sculptured the statue out of styrofoam, I covered it with craft paper. At first I covered the statue with 2 layers, but then I added 2 more layers to the throne as it is most likely to take some hits.
Tummemman pohjavärin päälle (1-pohjaa ja pastaa) töpöttelin erilaisia harmaita saadakseni aikaan kivimäisen pintakuvion, jossa mielestäni onnistuin ihan hyvin. Lopuksi viimeistelin pinnaan maalaamalla valtaistuimeen hieroglyfejä, ja varjostamalla joitakin kohtia patsaasta lisää.
On a darker base colour I painted some different shades of gray (not 50, though) to create a stone-like pattern. I think I succeeded quite well.
In my opinion, the statue is quite OK. I've got some praise, but naturally I see all the mistakes I've done. In the end the statue is fairly far from the original, but I have never been too good at sculpturing anything. This has been an excellent way of practising it, though, and I've enjoyded every moment. Even if it lasted so long. Perhaps, if I ever have a change again, I'll do better.
- Mea
keskiviikko 29. elokuuta 2012
Mussiikkia
Olen sävellellyt musiikkia elokuvaprojektiimme. Tällä hetkellä on valmiina perusteemat elokuvan alkuun ja lopputeksteihin. Ne molemmat löytyvät Mikseristä, jossa niitä voi kuunnella sekä ladata omalle koneelleen jos huvittaa.
I have been composing some music for our movie project. At the moment I have three themes ready. They can be found from Mikseri. net, where you can both listen to them and download them to your own computer, if you like.
Lavasteen musaa
-Mea
I have been composing some music for our movie project. At the moment I have three themes ready. They can be found from Mikseri. net, where you can both listen to them and download them to your own computer, if you like.
Lavasteen musaa
-Mea
perjantai 24. elokuuta 2012
Amenhotep edistyy!
Nyt olen viimein saanut patsaani veistettyä loppuun. Jes, jes, JES! :D
Now I have finally finished sculpting my statue, yays!
Olen jo aloittanut patsaan paperoimisen, mutta siitä en ole vielä ottanut kuvaa. Seuraavassa postauksessa on varmasti. Paljon verta, hikeä ja kiroiluja, eikä patsas ole edes tarpeeksi näköinen, mutta olkoot. Kelpaa minulle. Kelpaisi teatteriveistokseksi, koska kaukaa katsottuna on suorastaan erinomainen. Haa.
I've already started putting some cratf paper on it, but I don't have any pictures yet. In my next post I'm sure to have some. A lot of blood, tears and curses, and the statue doesn't even look like the original one, but oh well. It's a good theatrical statue, as it looks good from a distance.
Uudet ykköset, älkää ottako mallia huonosta päivitystahdistani. Lukekaa sarjakuvia mieluummin:
http://lavastellen.sarjakuvablogit.com
- Mea
Now I have finally finished sculpting my statue, yays!
Olen jo aloittanut patsaan paperoimisen, mutta siitä en ole vielä ottanut kuvaa. Seuraavassa postauksessa on varmasti. Paljon verta, hikeä ja kiroiluja, eikä patsas ole edes tarpeeksi näköinen, mutta olkoot. Kelpaa minulle. Kelpaisi teatteriveistokseksi, koska kaukaa katsottuna on suorastaan erinomainen. Haa.
I've already started putting some cratf paper on it, but I don't have any pictures yet. In my next post I'm sure to have some. A lot of blood, tears and curses, and the statue doesn't even look like the original one, but oh well. It's a good theatrical statue, as it looks good from a distance.
Uudet ykköset, älkää ottako mallia huonosta päivitystahdistani. Lukekaa sarjakuvia mieluummin:
http://lavastellen.sarjakuvablogit.com
- Mea
SketchUp-harjoite
Aloin aikani kuluksi mallintaa omaa akvaariotani, ihan kotikoneellani vain. Malli minulla nökötti selkäni takana, joten homma ei ollut vaikea. Altaan päälle mallinsin myös paludaarion rungon, koska suunnittelemme rakentavamme sellaisen oikeastikin.
2 tuntia tähän meni, mutta ihan hyvä siitä tuli siihen nähden, etten ole käyttänyt SketchUpia miltei puoleen vuoteen lainkaan. :D
- Mea
2 tuntia tähän meni, mutta ihan hyvä siitä tuli siihen nähden, etten ole käyttänyt SketchUpia miltei puoleen vuoteen lainkaan. :D
- Mea
perjantai 8. kesäkuuta 2012
Funpark
Neljän päivän ajan työskentelin Fantasiarakenteelle. Työnäni oli maalata Ideaparkin Funparkia, Suomen ja koko Euroopan suurinta sisähuvipuistoa. Mukana olivat myös Tanja, Roope, Tiina ja Juha.
For four days I worked for Fantasiarakenne. My job was to paint Funpark in Ideapark (the biggest indoor amusement park in Europe). With me there were also Tanja, Roope, Tiina and Juha from my school.
Maalasimme mustille seinille uv-valossa hohtavilla maaleilla sapluunoita apuna käyttäen n. 100 kuviota, isompia ja pienempiä. Lisäksi maalattavaksi tuli mustia, puisia kiekkoja ja lopuksi mustalla maalilla seinien siistiminen. Neljänä päivänä teimme töitä n. 7 tuntia ja se riitti hyvin. Jörö antoi meille kehuja nopeudesta ja hyvästä työstä.
Using templates we painted some figures on black walls. The paint was uv paint in multiple colours, and we painted about 100 figures, both big and small. We also painted some wooden parts black and fised the figures with black paint. On those four days we worked about 7 hours per day and it was enough. Jörö (the founder of the Fantasiarakenne) gave us gredit for quick and good work.
- Mea
For four days I worked for Fantasiarakenne. My job was to paint Funpark in Ideapark (the biggest indoor amusement park in Europe). With me there were also Tanja, Roope, Tiina and Juha from my school.
Maalasimme mustille seinille uv-valossa hohtavilla maaleilla sapluunoita apuna käyttäen n. 100 kuviota, isompia ja pienempiä. Lisäksi maalattavaksi tuli mustia, puisia kiekkoja ja lopuksi mustalla maalilla seinien siistiminen. Neljänä päivänä teimme töitä n. 7 tuntia ja se riitti hyvin. Jörö antoi meille kehuja nopeudesta ja hyvästä työstä.
Using templates we painted some figures on black walls. The paint was uv paint in multiple colours, and we painted about 100 figures, both big and small. We also painted some wooden parts black and fised the figures with black paint. On those four days we worked about 7 hours per day and it was enough. Jörö (the founder of the Fantasiarakenne) gave us gredit for quick and good work.
- Mea
tiistai 22. toukokuuta 2012
Naamiokurssi
Naamiokurssi vähän venyi ja vanui pitkin lukuvuotta monien tilaustöiden takia. Kuitenkin sain 2 naamiota tehtyä!
The mask course took a little more time than expected due to customer orders. Anyway, I managed to make 2 different kinds of masks.
Naamio 1: Skyrim; Ebony Helmet
Mask 1: Skyrim, Ebony Helmet
Idean tähän naamioon sain pelatessani Skyrimia. Pelihahmoni on pukeutunut ebony-haarniskaan, ja pidin kypärän mallista, joten halusin tehdä samanlaisen.
Aluksi muotoilin kypärän kuvulle savimuotin. Sen päällystin kuudella kerroksella voimapaperia, ja otin kuvun sitten irti muotistaan. Muut muodot kypärä sai pahvilla, jotka päällystin myöskin voimapaperilla. Visiirin peitin mustalla kalvolla, jonka kuumaliimasin paikoilleen. Viimeistelin pinnan mustalla ja hopealla spray-maalilla.
I got this idea when I played Skyrim. My game character wore the ebony armour, and I liked the desing very much, so I wanted to make one alike.
At first I sculptured a model for the top part of the helmet using normal clay. I used six layers of craft paper to make the top part and then took the clay out. The other parts of the helmet are made of cardboard, which I covered with craft paper, too. I used black film to create the vizier and clued it to it's place with hot glue. I finished the painting with black and silver sprays and painted the white ornaments by hand.
Naamio 2: Uruk-hai
Mask 2.: Uruk-hai
Halusin kokeilla kokonaamion tekemistä. Tämä onnistuisi kuulemma Revultexilla, mutta olisi pitkä prosessi.
Homma alkoi sillä, että aloin muotoilla styroksipään ympärille saviversiota naamiosta.
I wanted to make a full mask. I learned that I could try using revultex, a type of liquid latex, but it would be a long process to execute.
At first I made a head out of styrofoam, and then started to sculpt the shape of the mask with clay on it.
Valmis saviversio.
The clay version.
Seuraavaksi piti ottaa kipsivalos. Työ kesti kauan ja oli sottaista, mutta kyllä siitä lopulta möykky tuli. Valoksen irrottaminen oli kinkkisempi homma. Aukaistessa molemmat korvat irtosivat. Hirveän väännön jälkeen sain kuitenkin osat erilleen ja sitten otin saven irti.
The next part was to do a plaster cast. It took a long time and was really messy kind of work, but eventually I was able to do a desent lump around the head. Taking the cast off was a lot trickier than I thought. When I cracked the cast open, both ears cracked off, too. Eventually I managed to take the two sides of the cast apart and then I took the clay out.
Sitten muotteihin kaadettiin 3 kerrosta Revultexia. Kun ne olivat kuivuneet, vahvistin naamion kahdella sideharsokerroksella. Päälaelle pistin kolme kerrosta, koska aioin kiinnittävää vielä hiuksia.
Lopulta sain irrottaa naamarin. Siinä on hieman kipsimurusia kiinni, mutta onneksi kyseessä on örkki, niin epätasaisuudet eivät haittaa. :D
After that I clened the cast parst and poured 3 different layers of revultex in them. When they were dryed out, I strengtened the mask with two layers of gauze and glue. On top of it's head I used 3 layers of gauze as I planned to attach some fake hair on it.
Tässä vaiheessa liitin puolikkaat toisiinsa Revultexilla ja sideharsolla. Avasin myös silmät, korvat, sieraimet ja suun mattopuukolla ja halkaisin niskan ja takaraivon vetoketjua varten. Ostamani 30 cm pitkä vetoketju oli 3-4 cm liian pitkä, mutta sille ei voi mitään. Onneksi se jää vaatteiden alle käytettäessä.
Viimeisimmäksi ompelin päähän kiinni kasan mustia kuiturastoja, jotka 6 vuotta sitten roikkuivat omassa päässäni. Tässä oli kaikki mitä naamioille pystyi koulussa tekemään, sillä viimeinen ulkoasu lateksinaamioille tulee vasta maskeerauksen ohessa.
At this part I glued the two parts together with revultex and gauze. I also cut open the eyes, nostrils and mouth using a cutting knife. I cut the back of the head open too, as I was going to glue a zipper in it. I bought a 30 cm long zipper, which was about 3-4 cms too long, but it can be hid under a shirt.
The last part of my mask was to sew some black fiber dreadlocks, which used to be on my head. This was all I could do for the mask at school, because if this was ever worn, then it should be made looking better with some make-up.
Tämä kuva on kaikkea muuta kuin edustava, mutta siitä saanee pohjimmaisen idean. Toivottavasti tässä joskus saan maskeerattua naamion valmiiksi jonkun yllä ja kuvattua sen.
This picture doesn't show the mask at it's best, but at least you can get the idea. I hope that some day I'll be able to take a picture with someone wearing it and a proper make-up on it.
- Mea M.
The mask course took a little more time than expected due to customer orders. Anyway, I managed to make 2 different kinds of masks.
Naamio 1: Skyrim; Ebony Helmet
Mask 1: Skyrim, Ebony Helmet
Idean tähän naamioon sain pelatessani Skyrimia. Pelihahmoni on pukeutunut ebony-haarniskaan, ja pidin kypärän mallista, joten halusin tehdä samanlaisen.
Aluksi muotoilin kypärän kuvulle savimuotin. Sen päällystin kuudella kerroksella voimapaperia, ja otin kuvun sitten irti muotistaan. Muut muodot kypärä sai pahvilla, jotka päällystin myöskin voimapaperilla. Visiirin peitin mustalla kalvolla, jonka kuumaliimasin paikoilleen. Viimeistelin pinnan mustalla ja hopealla spray-maalilla.
I got this idea when I played Skyrim. My game character wore the ebony armour, and I liked the desing very much, so I wanted to make one alike.
At first I sculptured a model for the top part of the helmet using normal clay. I used six layers of craft paper to make the top part and then took the clay out. The other parts of the helmet are made of cardboard, which I covered with craft paper, too. I used black film to create the vizier and clued it to it's place with hot glue. I finished the painting with black and silver sprays and painted the white ornaments by hand.
Naamio 2: Uruk-hai
Mask 2.: Uruk-hai
Halusin kokeilla kokonaamion tekemistä. Tämä onnistuisi kuulemma Revultexilla, mutta olisi pitkä prosessi.
Homma alkoi sillä, että aloin muotoilla styroksipään ympärille saviversiota naamiosta.
I wanted to make a full mask. I learned that I could try using revultex, a type of liquid latex, but it would be a long process to execute.
At first I made a head out of styrofoam, and then started to sculpt the shape of the mask with clay on it.
Valmis saviversio.
The clay version.
Seuraavaksi piti ottaa kipsivalos. Työ kesti kauan ja oli sottaista, mutta kyllä siitä lopulta möykky tuli. Valoksen irrottaminen oli kinkkisempi homma. Aukaistessa molemmat korvat irtosivat. Hirveän väännön jälkeen sain kuitenkin osat erilleen ja sitten otin saven irti.
The next part was to do a plaster cast. It took a long time and was really messy kind of work, but eventually I was able to do a desent lump around the head. Taking the cast off was a lot trickier than I thought. When I cracked the cast open, both ears cracked off, too. Eventually I managed to take the two sides of the cast apart and then I took the clay out.
Sitten muotteihin kaadettiin 3 kerrosta Revultexia. Kun ne olivat kuivuneet, vahvistin naamion kahdella sideharsokerroksella. Päälaelle pistin kolme kerrosta, koska aioin kiinnittävää vielä hiuksia.
Lopulta sain irrottaa naamarin. Siinä on hieman kipsimurusia kiinni, mutta onneksi kyseessä on örkki, niin epätasaisuudet eivät haittaa. :D
After that I clened the cast parst and poured 3 different layers of revultex in them. When they were dryed out, I strengtened the mask with two layers of gauze and glue. On top of it's head I used 3 layers of gauze as I planned to attach some fake hair on it.
Tässä vaiheessa liitin puolikkaat toisiinsa Revultexilla ja sideharsolla. Avasin myös silmät, korvat, sieraimet ja suun mattopuukolla ja halkaisin niskan ja takaraivon vetoketjua varten. Ostamani 30 cm pitkä vetoketju oli 3-4 cm liian pitkä, mutta sille ei voi mitään. Onneksi se jää vaatteiden alle käytettäessä.
Viimeisimmäksi ompelin päähän kiinni kasan mustia kuiturastoja, jotka 6 vuotta sitten roikkuivat omassa päässäni. Tässä oli kaikki mitä naamioille pystyi koulussa tekemään, sillä viimeinen ulkoasu lateksinaamioille tulee vasta maskeerauksen ohessa.
At this part I glued the two parts together with revultex and gauze. I also cut open the eyes, nostrils and mouth using a cutting knife. I cut the back of the head open too, as I was going to glue a zipper in it. I bought a 30 cm long zipper, which was about 3-4 cms too long, but it can be hid under a shirt.
The last part of my mask was to sew some black fiber dreadlocks, which used to be on my head. This was all I could do for the mask at school, because if this was ever worn, then it should be made looking better with some make-up.
Tämä kuva on kaikkea muuta kuin edustava, mutta siitä saanee pohjimmaisen idean. Toivottavasti tässä joskus saan maskeerattua naamion valmiiksi jonkun yllä ja kuvattua sen.
This picture doesn't show the mask at it's best, but at least you can get the idea. I hope that some day I'll be able to take a picture with someone wearing it and a proper make-up on it.
- Mea M.
Tilaa:
Blogitekstit (Atom)





